[Equest-users] Analysis for a single area on a building

[Grammy]

Hello, Fernando,

You can give a specific meter for this room in the model - if you have the
whole building model already.

If not, I suggest you build a simple model that keep the CT room and X-ray
room the same with your proposed, as external wall still external wall,
internal wall still internal wall. Be careful to set the internal wall to
suitable type - most of time *air* is not the best choice as eQuest default.

I am also looking forward to other better idea for this scenario.

Grammy

On Wed, Dec 1, 2010 at 11:48 PM, Fernando Valenzuela
<fer.val.dom at gmail.com>wrote:

> Hello everyone I need a simulation of the heating and
> cooling consumption but only for a CT room and X-ray room on hospital. I
> know the year rates for HVAC for the whole building.
>
> Is it possible to run a simulation on equest just for a single room?. If
> so, which building type should I use "health medical (outpatient)"
>
>
> Thanks
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101202/841dff48/attachment-0002.htm>