[Equest-users] Glass Types

[Susan Trzos]

Could someone explain to me the proper way to model the ASHRAE 90.1 glass versus a proposed glass type in a parametric run, such as a Viracon VRE 15-38? Is it possible to accurately model these using the simplified glass type in the detailed interface -- setting the u-value, shading coefficient, and frame width as global parameters ?

Any help or suggestions would be appreciated.

Thanks,

SUSAN TRZOS, LEED(r) AP

SKIDMORE, OWINGS & MERRILL LLP
224 SOUTH MICHIGAN
CHICAGO, IL 60604
T: 312.360.4234  F: 312.360.4545
SUSAN.TRZOS at SOM.COM

SOM

The information contained in this communication may be confidential, is intended only for the use of the recipient(s) named above, and may be legally privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited and may be unlawful. If you have received this communication in error, please return it to the sender immediately and delete the original message and any copy of it from your computer system. If you have any questions concerning this message, please contact the sender.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100204/1e02d5fb/attachment.htm>