[Equest-users] Delving into your building

[Anand.Varahala at us.schneider-electric.com]

Paul,

You will have to switch to Detailed Data Edit mode. In the component list, 
the top most would be "Project: " followed by the name of your project. 
Double Click on that and switch to "3-D View Details" tab.

Hope it helps. Great find Demba, thanks for sharing.
_____________________________________________________________________________________ 


Anand Varahala, LEED® AP  |   Schneider Electric   |  Energy Solutions  |  
Application Engineer 
Phone: +1 (919) 227-3920  |   Fax: +1 (859) 962-4561  |   Mobile: +1 (919) 
720-0769 
Email: Anand.Varahala at us.schneider-electric.com  |   Site: 
www.schneider-electric.us  |   Address: 4917 Waters Edge Dr, Suite 270, 
Raleigh NC 27606 USA
P Please consider the environment before printing this e-mail 




equest-users-request at lists.onebuilding.org 
Sent by: equest-users-bounces at lists.onebuilding.org
02/16/2010 03:03 PM
Please respond to
equest-users at lists.onebuilding.org


To
equest-users at lists.onebuilding.org
cc

Subject
Equest-users Digest, Vol 23, Issue 28






Send Equest-users mailing list submissions to
                 equest-users at lists.onebuilding.org

To subscribe or unsubscribe via the World Wide Web, visit
                 
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org

or, via email, send a message with subject or body 'help' to
                 equest-users-request at lists.onebuilding.org

You can reach the person managing the list at
                 equest-users-owner at lists.onebuilding.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Equest-users digest..."


________________________________________________________________________
This email has been scanned for SPAM content and Viruses by the MessageL
abs Email Security System.
________________________________________________________________________Today's 
Topics:

   1. Delving into your building (Demba Ndiaye)
   2. Appendix G Baseline PVAVS System (omoltay at mimtarch.com)
   3. Re: Delving into your building (Paul Diglio)

----- Message from Demba Ndiaye <Demba.Ndiaye at setty.com> on Tue, 16 Feb 
2010 14:28:27 -0500 -----
To:
"equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
Subject:
[Equest-users] Delving into your building
I forgot to share this. Some already know it and are using it?
 
It is a feature that can be useful; for instance, in looking for missing 
walls?
 
Go to the ?Project Properties? Dialog box, ?3-D View Details? tab: on the 
list of ?Components to View?, uncheck which ever might you want, specially 
roofs, floors, exterior walls, ceilings. You can then see the interior of 
your building as never before.
 
______________
Demba NDIAYE
----- Message from omoltay at mimtarch.com on Tue, 16 Feb 2010 14:24:49 -0600 
(CST) -----
To:
equest-users at lists.onebuilding.org
Subject:
[Equest-users] Appendix G Baseline PVAVS System
Hello,

For modelling of the baseline HVAC system I have to use packaged VAV with
reheat (System 5). Does this mean that there will only be zonal heating or
can one also provide central heating in the packaged unit?

Also, I observe that for heating, eQuest will only deliver a minute CFM
for supply, whereas the cooling the supply flow is very flexible. As a
result I have a huge number of unheated hours.

For example, my outdoor air ventilation is 98 CFM, and zone design supply
is 828 CFM. The min. flow fraction is 0.118. I winter periods I get only
120 CFM at constant volume which is not sufficient for meeting the loads.

How can I increase this CFM and also make it variable so that my system
can deliver the varying heating energy during the day?

Thank you,

Omer Moltay, LEED AP



----- Message from Paul Diglio <paul.diglio at sbcglobal.net> on Tue, 16 Feb 
2010 11:46:50 -0800 (PST) -----
To:
Demba Ndiaye <Demba.Ndiaye at setty.com>, 
"equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
Subject:
Re: [Equest-users] Delving into your building
Demba:

Can you explain how to get to the Project Properties Dialog box?  I cannot 
find the Components to View list.  In Wizard or Detailed Mode?

Thank you,

Paul Diglio, CEM

From: Demba Ndiaye <Demba.Ndiaye at setty.com>
To: "equest-users at lists.onebuilding.org" 
<equest-users at lists.onebuilding.org>
Sent: Tue, February 16, 2010 2:28:27 PM
Subject: [Equest-users] Delving into your building

I forgot to share this. Some already know it and are using it?
 
It is a feature that can be useful; for instance, in looking for missing 
walls?
 
Go to the ?Project Properties? Dialog box, ?3-D View Details? tab: on the 
list of ?Components to View?, uncheck which ever might you want, specially 
roofs, floors, exterior walls, ceilings. You can then see the interior of 
your building as never before.
 
______________
Demba NDIAYE_______________________________________________
Equest-users mailing list
Equest-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100216/4ca32a8c/attachment-0002.htm>