[Equest-users] drawing and unusual roof

[John Aulbach]

Yehuda:

Make the walls the same height for the initial roof (lower), then add an additional shell for the two story section (in the Wizard)

Then go to the Detailed Edist mode and make the section with the slant roof have the wall of the higher roof part a higher wall.

This should work.




________________________________
From: Yehuda Israel <yehuda at newsource-energy.com>
To: equest-users at lists.onebuilding.org
Sent: Sat, January 30, 2010 11:45:32 AM
Subject: [Equest-users] drawing and unusual roof


I am trying to model a one story building that has a slanted roof.  How do I make a slanted roof in eQuest?  Part of the roof is not slanted.  This part is one-story higher than the slanted roof.  How do I draw a roof at two different heights in eQuest?  
 
Thank you.
 
Yehuda


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100130/32a639a5/attachment-0002.htm>