[Equest-users] OK, I give up !!!!!!!!!!!!!!!!!!!!!

John Aulbach jra_sac at yahoo.com
Sun Jan 31 18:29:04 PST 2010


I have two separate models, one without internal loads to a building section, one adding load (including DHW) to the previously unconditioned building section. I attached the .PD2 and .INP files for the "larger load" model.

The added heating, cooling, lighting, and equip loads show up, but the DHW load remains the same.

In this "larger model", I made a second DHW circulation loop, fired by a 2separate DHW heater. I even change the dirver for the heater location.

No change.

What, o eQuest word, am I missing ?

My humble thanks

John Aulbach


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100131/4882a749/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Abraham House-DETAIL-INCL 350 HVAC.pd2
Type: application/octet-stream
Size: 29951 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100131/4882a749/attachment-0004.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Abraham House-DETAIL-INCL 350 HVAC.inp
Type: application/octet-stream
Size: 115449 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100131/4882a749/attachment-0005.obj>


More information about the Equest-users mailing list