[Equest-users] Humidity control in PSZ Heat Pump system in Base design

[Derek Huang]

Hi all,

 

Per ASHRAE 90.1, I have to specify PSZ heat pump for each zone. Each
unit serves one zone of a data center. From the DD Wizard, I have
modified to add humidity controls in Detailed Data Edit mode but it
seems the Base model didn't take this into account (can tell from the
energy summary). Any ideas ?

 

Thanks

 

Derek Huang, LEED AP, CPD                                       

Mechanical Engineer

 

 

 

97 E. Brokaw Road, No 300

San Jose, CA 95112

Direct: 408 487-1305

Fax:      408 436-1511

www.atce.com <http://www.atce.com/> 

derek.huang at atce.com

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100710/b3e6bd2c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2266 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100710/b3e6bd2c/attachment.jpeg>