[Equest-users] Unmet Hours

[Martz, Amanda]

When I look under the summary tab, it says I have 34% unmet hours. When
I look at the BEPS report, it says I have 3%. Does anyone know what the
difference in these numbers is?

 

________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Kelsey
VanTassel
Sent: Thursday, July 15, 2010 3:50 PM
To: M. Shields; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Unmet Hours

 

I like to look under Airside HVAC. Click on the summary tab, then click
on "project" in the component tree on the left hand side. It will show
you the sum automatically.

 

Kelsey Van Tassel

Mechanical Engineer | kvantassel at sustaineng.com

608.836.4488 ext. 20 | Fax: 608.836.4477

 

Sustainable Engineering Group

901 Deming Way, Suite 201

Madison, WI 53717

www.sustaineng.com <http://www.sustaineng.com/> 

 

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of M.
Shields
Sent: Thursday, July 15, 2010 2:47 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Unmet Hours

 

Hi All,

 

I am trying to determine the number of unmet cooling and heating hours
for my model.  From what I've read on the BEPU/BEPS reports I can find
the % of the hours that the load is unmet, but is there a way to break
this out into cooling and heating time?  The other alternative I see is
to go through either the SS-F reports, or the Air-Side HVAC section and
add up all of the zones unmet heating and cooling hours.  Does anyone
know of a better way to determine this?

 

Thanks,

Michael Shields

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100715/4cac2b0f/attachment-0001.htm>