[Equest-users] Reports

[tim]

Doi - thanks

 

I see also .csv files are generated in the project folder so I'll check
those out as well.

 

Anybody have an example of a LEED section 1.4 table that USGBC accepted by
any chance?

 

Tim

 

 

From: Martz, Amanda [mailto:amartz at klingstubbins.com] 
Sent: Tuesday, July 20, 2010 8:37 AM
To: tim; equest-users at lists.onebuilding.org
Subject: RE: [Equest-users] Reports

 

When you run the simulation, a window should pop up with three buttons that
say "return to input building description" or "view summary results/reports"
or "view detailed simulation output file." The first option returns you to
the model, the second shows you a bar graph with electricity usage, and the
third shows you the couple thousand page report that you're probably looking
for. 

 

  _____  

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of tim
Sent: Tuesday, July 20, 2010 8:32 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Reports

 

How do I get reports?  

 

I have set up fairly simple simulations, using as many defaults as possible.
Then I run the simulations and go to "Project & Site", but no summaries are
available in the simulation output folder.  I have results, but no reports.
Do I need to change a setting in each properties dialog or what?

 

Trying to fill out the LEED 1.4 table & to find out what the actual capacity
of my auto-sized heating is, but there are also many other items in that
table I need to find - hoping when I learn how reports are generated and
viewed, I can find it all and report it to LEED.

 

 

Thanks in advance,

Tim

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100720/ef531128/attachment-0001.htm>