[Equest-users] HVAC efficiencies

[Mary Wyllie]

I'm impressed, Peter.  I thought I was probably the only architect
trying to muddle my way through equest.  And, I see you are a neighbor.

 

Mary Wyllie | AIA | LEED AP

Associate

Hiscutt & Associates, Inc.

3655 Brookside Pkwy., Suite 575

Alpharetta, GA 30022

(770) 753-8787

 

Reduce Reuse Recycle *

________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Peter
Hillermann
Sent: Friday, June 11, 2010 9:26 AM
To: 'Pasha Korber-Gonzalez'
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] HVAC efficiencies

 

Pasha,

 

Thank you for the sheet. I assume most of the people using eQuest just
use the design wizards with EER entries to keep it simple. Unfortunately
I cannot go to the wizard because it makes other parts of our BIM
process complicated since our files are gbXML and I just use INP DOE
conversion files for eQuest so I have to learn in detail mode. I really
appreciate the help.

 

Thanks,

 

PETER HILLERMANN

 

peterh at westallarchitects.com

 

westall

architects

3404 pierce drive

chamblee, georgia 30341

 

o 770.458.4113

f  770.458.5352

c 678.898.2936

 

westallarchitects.com

  

 

 

 

From: Pasha Korber-Gonzalez [mailto:pasha.pkconsulting at gmail.com] 
Sent: Thursday, June 10, 2010 10:44 PM
To: Peter Hillermann
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] HVAC efficiencies

 

Peter,

 

see attached for the only official reference that I posess.  Essentialy
you can easily calculate EIR from 1/COP of any performance value that
you have.  The conversion from EER or SEER to COP is sometimes what is
missed in this exercised.

 

Hope this helps.

 

Pasha

On Thu, Jun 10, 2010 at 1:55 PM, Peter Hillermann <
e190984026 at exchange.1and1.com> wrote:

To All,

 

I have scanned the document e-mails and found nothing on EER or SEER
conversion for the EIR and FIR performance curves. Can anyone tell me
how to change the efficiencies of the units in detail mode. I did the
schematic design wizard but the performance curves were turning out the
same. HELP!!!

 

Thanks,

 

PETER HILLERMANN

 

peterh at westallarchitects.com

 

westall

architects

3404 pierce drive

chamblee, georgia 30341

 

o 770.458.4113

f  770.458.5352

c 678.898.2936

 

westallarchitects.com <http://westallarchitects.com/> 



 


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to 
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100611/79ca85ad/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3222 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100611/79ca85ad/attachment-0002.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 2436 bytes
Desc: image002.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100611/79ca85ad/attachment-0002.gif>