[Equest-users] Undergound floor

[Larry Yang]

Chris,
It sounds you need to create in 2D geometry a polygon of the shape which
you want your under ground floor to be (i.e. 3' by the length). The
child component need to call this polygon you created.
Hope this helps. 
Larry
Enermodal.
-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Chris
Jones
Sent: Monday, June 21, 2010 12:56 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Undergound floor

Is there a way to insert an underground floor that is not the size of 
the entire floor of the space.  I would like to insert a ug floor 
that is a 3' strip along the perimeter of the space.  When I insert 
Child Component, Underground Floor, equest makes it the size/shape of 
the entire space.  The UG floor dialog allows me to change the area 
but then I get a Bad Building Component error.




Chris Jones
14 Oneida Avenue
Toronto, ON M5J 2E3.
Tel.  416-203-7465
Fax. 416-946-1005


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG