[Equest-users] Error Message

Carol Gardner cmg750 at gmail.com
Thu Mar 4 16:40:55 PST 2010


If you zip up the .pd2 and .inp of the file with the error chances are
someone may be able to help you.
Carol

On Thu, Mar 4, 2010 at 4:12 PM, Richard Yam <RichardY at bycar.ca> wrote:

>  Hi,
>
> I'm getting the following error which causes the program to abort:
>
> The instruction at "0x73dd11c7" referenced memory at "0x00000004". The
> memory could not be "read".
>
> The changes which seem to cause this error are lowering the lighting power
> density or shading coefficient. When I revise these numbers back up the
> error is gone, but I need to lower my numbers to simulate the building.
>
> I don't know if the error is caused by these changes or if it may be
> Windows based. Any suggestions?
>
> Thanks,
>
>   Richard Yam, P. Eng.
> LEED Accredited Professional
> Project Manager
>
>  BYCAR Engineering Ltd.
> 105a - 7808 132nd Street
> Surrey, BC V3W 4N1
> Ph. 604 591-2766    Fax 604 591-2733
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/17e370eb/attachment-0002.htm>


More information about the Equest-users mailing list