[Equest-users] Error Message

[Richard Yam]

Hi,
 
I'm getting the following error which causes the program to abort:

The instruction at "0x73dd11c7" referenced memory at "0x00000004". The
memory could not be "read".
 
The changes which seem to cause this error are lowering the lighting
power density or shading coefficient. When I revise these numbers back
up the error is gone, but I need to lower my numbers to simulate the
building.
 
I don't know if the error is caused by these changes or if it may be
Windows based. Any suggestions?
 
Thanks,
 
 
Richard Yam, P. Eng.
LEED Accredited Professional
Project Manager
 
BYCAR Engineering Ltd.
105a - 7808 132nd Street
Surrey, BC V3W 4N1
Ph. 604 591-2766    Fax 604 591-2733
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/aeff1573/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1974 bytes
Desc: RY signature.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/aeff1573/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Richard Yam (richardy at bycar.ca).vcf
Type: text/x-vcard
Size: 423 bytes
Desc: Richard Yam (richardy at bycar.ca).vcf
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/aeff1573/attachment.vcf>