[Equest-users] modeling a pre-cooilng coil

Lauren Rosenthal Lauren.Rosenthal at arup.com
Mon May 3 18:03:33 PDT 2010


I tried to model a pre-cooling coil (for the OA stream) by creating an
additional system that has 0 kW/cfm fan power and by assigning the main
system's OA to come from this OA system. However, in the simulation
results, the OA system had 0 MBTU for cooling/heating. In the OA system
I put a dummy zone on the system with no load in the hopes that the load
would be controlled by the OA demand from the zones in the main system.
What am I doing wrong?

 

Thanks for any help in advance,

 

____________________________________

Lauren Rosenthal

Mechanical Engineer

 

Los Angeles, CA 

 

____________________________________________________________
Electronic mail messages entering and leaving Arup  business
systems are scanned for acceptability of content and viruses
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100503/ae7e8cd9/attachment.htm>


More information about the Equest-users mailing list