[Equest-users] modeling a pre-cooilng coil

[Carol Gardner]

Hi Lauren,

If you are willing to Zip your .pd2 and .inp files together into 1 file, one
of us may be willing and able to help you. Zipping them together makes it
easier for those of us that use gmail.

Regards,
Carol

On Mon, May 3, 2010 at 6:03 PM, Lauren Rosenthal
<Lauren.Rosenthal at arup.com>wrote:

>  I tried to model a pre-cooling coil (for the OA stream) by creating an
> additional system that has 0 kW/cfm fan power and by assigning the main
> system’s OA to come from this OA system. However, in the simulation results,
> the OA system had 0 MBTU for cooling/heating. In the OA system I put a dummy
> zone on the system with no load in the hopes that the load would be
> controlled by the OA demand from the zones in the main system. What am I
> doing wrong?
>
>
>
> Thanks for any help in advance,
>
>
>
> ____________________________________
>
> Lauren Rosenthal
>
> Mechanical Engineer
>
>
>
> Los Angeles, CA
>
>
>
> ____________________________________________________________
> Electronic mail messages entering and leaving Arup  business
> systems are scanned for acceptability of content and viruses
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100503/d854d35e/attachment-0002.htm>