[Equest-users] T-Stat is acting Screwy

Carol Gardner cmg750 at gmail.com
Wed May 19 07:52:02 PDT 2010


Are you changing them in DD? If you are and it's not working I'd do it in
the .inp deck. Not too hard to fix in BDL. Just find the specific schedules
you want and don't change and usernames.
 Carol

On Wed, May 19, 2010 at 6:46 AM, Rob Hudson <rdh4176 at gmail.com> wrote:

> I have a lab space that is kept between 73 and 70 degrees all year long.
> One of my parametric runs has the cooling and heating T-stat schedules
> changing to have night time setbacks to 80 and 60, respectively.  When i use
> these, i get more energy spent overall.  specifically, i have a chilled
> water meter, steam meter, electric meter and hot water meter to monitor
> everything.  The chilled water increases while the others slightly decrease
> when i use the set back schedules.  Any ideas?
>
> --
> Rob Hudson
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100519/e102b360/attachment-0001.htm>


More information about the Equest-users mailing list