[Equest-users] T-Stat is acting Screwy

[Rob Hudson]

I am working in the DD and i have created my own schedules.

On Wed, May 19, 2010 at 10:52 AM, Carol Gardner <cmg750 at gmail.com> wrote:

> Are you changing them in DD? If you are and it's not working I'd do it in
> the .inp deck. Not too hard to fix in BDL. Just find the specific schedules
> you want and don't change and usernames.
>  Carol
>
> On Wed, May 19, 2010 at 6:46 AM, Rob Hudson <rdh4176 at gmail.com> wrote:
>
>> I have a lab space that is kept between 73 and 70 degrees all year long.
>> One of my parametric runs has the cooling and heating T-stat schedules
>> changing to have night time setbacks to 80 and 60, respectively.  When i use
>> these, i get more energy spent overall.  specifically, i have a chilled
>> water meter, steam meter, electric meter and hot water meter to monitor
>> everything.  The chilled water increases while the others slightly decrease
>> when i use the set back schedules.  Any ideas?
>>
>> --
>> Rob Hudson
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
>
> --
> Carol Gardner PE
>



-- 
Rob Hudson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100519/1f1609e5/attachment-0001.htm>