[Equest-users] Large Auxiliary Energy Use

[Dana Troy]

In eQUEST, I have a chilled water VAV system with no heating and an
economizer.

 

When I set the economizer limits to 70-F high and 55-F low, the energy
use is as expected. The chiller operates more hours, etc.

 

When I eliminate the low limit, the chiller energy use goes way down as
expected, however, an extremely large auxiliary energy use shows up on
the BEPS and BEPU report. It is not the pumps, because I checked the
energy use of the pumps in the PS-C report.

 

When looking through the output report I can't find anything that is
showing where that energy use is coming from.

 

Has anyone ever encountered this before that could provide some
enlightenment?

 

Thanks,

Dana

 

Dana Troy
Senior Energy Analyst
LEED AP(r) 

  <http://www.glumac.com/> 

________________________________

320 SW Washington, Suite 200
Portland, OR 97204-2640
T.  503.227.5280  F. 503.274.7674

Thinking. Inside the building.
www.glumac.com <http://www.glumac.com/>  
 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101013/13211870/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3422 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101013/13211870/attachment-0001.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1425 bytes
Desc: image002.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101013/13211870/attachment-0001.gif>