[Equest-users] HP and HW Loops

[James Newman]

Rob,

I recently had a system that was a geothermal heat pump system and the design called for supplemental heating from a boiler to add to the heat pump loop. After reading the capabilities of equest, I found that you are able to do a cooling supplement with a cooling tower, but as of now you can't add supplemental heating to the loop. Hope this will save you some time in research.

James M. Newman

M-E Engineers, Inc.<http://www.me-engineers.com/>
10055 west 43rd avenue
wheat ridge, co 80033

office:  303.421.6655
direct:  720.898.3148
james.newman at me-engineers.com<mailto:catie.williams at me-engineers.com>

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Rob Hudson
Sent: Tuesday, October 26, 2010 8:50 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] HP and HW Loops

I have a interesting set of systems attached to the same loop.  there is a hot water loop with boilers providing some heating to a few Cab heaters and fin tube.  this loop also provides the heating for a Heat pump loop in the winter, which also has a cooling tower equiped.  i cannot find a way to make these loops interact with each other due to one being HW and the other WLHP.  Any bright ideas?

thanks for the help.

--
Rob Hudson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101026/a70ea862/attachment-0002.htm>