[Equest-users] Auto-size HVAC from Detailed Mode

[Weekly, Ashley]

Hello everyone.  I'm working on a baseline 2-story residential model
using PTAC's for LEED.  I'm having problems complying with the unmet
hours in several locations.  I have commercial cooking equipment and
laundry machines as my only large loads.  I have entered my calculated
heating and cooling capacities and my calculated CFM for each space into
detailed mode.  To help with my unmet hours, I bumped my sizing ratio up
to 1.25 and set my throttling range at 6.  Still high unmet hours.  I
was wondering if there is a way to switch heating and cooling capacities
back to auto-size from detailed mode or do I just have to bump my
capacities up until they cover my hours?

 

 

 

 


This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Pryor & Morrow Architects, P.A. Finally, the recipient should check this email and any attachments for the presence of viruses. Pryor & Morrow Architects & Engineers, P.A. accepts no liability for any damage caused by any virus transmitted by this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100929/e38bbbeb/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 12570 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100929/e38bbbeb/attachment.jpeg>