[Equest-users] LEED EAp1 baseline problem

何宗翰 tzunghan.ho at gmail.com
Thu Aug 25 18:06:30 PDT 2011


Hello All,

I am trying to establish the baseline model for LEED NC 3.0, and have some
problem as following:

1. From ASHRAE 90.1 2007  G3.1.2.8, does it mean that I can simulation the
supply airflow rate by
    setting MIN-SUPPLY-T & DESIGN-COOL-T have 20 degree difference and let
eQUEST to calculate the
    supply airflow automatically?
2. My baseline HVAC is system No.8, VAV with PFP boxes, so from G3.1.3.12,
the supply air temperature reset must depend on the load, but I can't find
this setting option in eQUEST, could anybody tell me how to set that?
3.Because I am not in a LEED project, could anyone send me the LEED NC3.0
"EAp2 Section 1.4 table.xls" to check if there is anything I loss?


Thanks in advance,


Stan Ho
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110826/e4acdf42/attachment.htm>


More information about the Equest-users mailing list