[Equest-users] how to model 40% glazing on baseline

[Syed, Fareed]

Hello All,

Can anyone please let me know how to model 40% glass on the baseline design?

In my proposed design I used customized glass as there is 100% glass on north and south.

Thanks in advance.



Fareed Syed EIT LEED(r) AP
Analytics Specialist

Halcrow Yolles
One South Dearborn
21st Floor
Chicago, IL 60603

tel:       +1 312 212 4430
fax:      +1 312 212 4206
www.halcrowyolles.com<http://www.halcrowyolles.com/>

Sustaining and improving the quality of people's lives



Visit our website at http://www.halcrow.com

------------------------------------------------------------------------
The contents of this email are confidential, for the sole use
of the intended recipient at the email address to which it has
been addressed and do not give rise to any binding legal
obligation upon Halcrow companies unless subsequently confirmed
on headed business notepaper sent by fax, letter or as an email
attachment.  Whilst reasonable care has been taken to avoid virus
transmission, no responsibility for viruses is taken and it is
your responsibility to carry out such checks as you feel
appropriate.  Emails supplied are as found and there's no
guarantee that the messages contained within the body of the
email have not been edited after receipt. If you receive this
email in error, please contact the sender immediately and delete
the message from your system.
Thank you.
-------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110218/79ba99a8/attachment.htm>