[Equest-users] Building Shell Load Summary

[Pasha Korber-Gonzalez]

Yes,  start by looking at your LS-C report for peak building loads.  Note
that the "Loads" reports do not include ventilation energy until the Systems
level (or systems reports.)

Also, check out the attached doc to help you get familiar with what DOE2
output reports provide which info you are looking for.

Pasha

On Mon, Jan 3, 2011 at 10:38 AM, Jonathan Bowser <
JonathanBowser at beck-technology.com> wrote:

>  In the SS-D report I can see the cooling, heating and electrical energy
> required by the systems and zones served by the central plant, but is there
> a system report that I can look at that would give me the same energy loads
> but broken apart on a building shell level?
>
>
>
> -- Jon
>
>
>
>
>
> *Jonathan Bowser*
>
> Senior Software Engineer
>
> Beck Technology
>
> 1807 Ross Avenue, Suite 500
>
> Dallas, TX 75201
>
> (214) 303-6815
>
> www.beck-technology.com
>
>
>
> *Innovation in All Dimensions*
>
> **
>
> Please consider the environment before printing this e-mail
>
> *  *
>
> This e-mail may be privileged and confidential. If you are not the intended
> recipient, please delete from all computers.
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110103/55bdccaa/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Detailed Simulation Reports Summary.pdf
Type: application/pdf
Size: 564467 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110103/55bdccaa/attachment-0001.pdf>