[Equest-users] Building Shell Load Summary

[John Aulbach]

Johnathan:

Be careful on assuiming the sum of the SS-A will equal the SS-D numbers. The 
SS-D is building level, and may "smooze" some of the data together.

John R. Aulbach, PE, CEM
Senior Energy Engineer

________________________________

PartnerEnergy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com
 




________________________________
From: Jonathan Bowser <JonathanBowser at beck-technology.com>
To: "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
Sent: Mon, January 3, 2011 1:37:26 PM
Subject: Re: [Equest-users] Building Shell Load Summary


Thanks for the attached PDF.  It definitely helps explain what calculations are 
going into the numbers.
 
Rather than looking at the LS-C report, could I look at SS-A report (that 
includes the ventilation energy) and tally up the monthly numbers for the 
components that make up an a building shell and essentially have information at 
the shell level that is similar to the information provided in the SS-D report?
 
-- Jon
 
 
 
Jonathan Bowser
Senior Software Engineer
Beck Technology 
1807 Ross Avenue, Suite 500
(214) 303-6815
www.beck-technology.com
 
Innovation in All Dimensions
  Please consider the environment before printing this e-mail 
  
This e-mail may be privileged and confidential. If you are not the intended 
recipient, please delete from all computers.



________________________________

From:Pasha Korber-Gonzalez [mailto:pasha.pkconsulting at gmail.com] 
Sent: Monday, January 03, 2011 12:17 PM
To: Jonathan Bowser
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Building Shell Load Summary
 
Yes,  start by looking at your LS-C report for peak building loads.  Note that 
the "Loads" reports do not include ventilation energy until the Systems level 
(or systems reports.)
 
Also, check out the attached doc to help you get familiar with what DOE2 output 
reports provide which info you are looking for.
 
Pasha
On Mon, Jan 3, 2011 at 10:38 AM, Jonathan Bowser 
<JonathanBowser at beck-technology.com> wrote:
In the SS-D report I can see the cooling, heating and electrical energy required 
by the systems and zones served by the central plant, but is there a system 
report that I can look at that would give me the same energy loads but broken 
apart on a building shell level?
 
-- Jon
 
 
Jonathan Bowser
Senior Software Engineer
Beck Technology 
1807 Ross Avenue, Suite 500
Dallas, TX 75201
(214) 303-6815
www.beck-technology.com
 
Innovation in All Dimensions
  
Please consider the environment before printing this e-mail 
  
This e-mail may be privileged and confidential. If you are not the intended 
recipient, please delete from all computers.
 

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to 
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
 
Dallas, TX 75201 


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110103/e90fba7e/attachment-0001.htm>