[Equest-users] Air Handler Per Floor

[Charles Land]

I would set it as air handler per floor as you have it and then make the changes in the detail mode.  Or make three separate systems per site and assign the correct shells and floors to the units in the wizard.

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Roger Maranan
Sent: Thursday, July 14, 2011 11:05 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Air Handler Per Floor

Hi,

How do I apply an air handler per floor with multiple shells on the same floor?I am trying to model an HVAC system with an air handler on each floor of a two story building. How the building is set up in my model is that shells 1 and 2 are the first floor and shell 3 is the basement.

Thanks for the help,

Roger Maranan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110714/d9465d9e/attachment-0002.htm>