[Equest-users] Air Handler Per Floor

[Roger Maranan]

Sorry, when you say "make the changes in detail mode" what do you mean
exactly? How do I connect the two shells on the same floor to share the same
air handler? I'm fairly new to eQUEST so sorry if this is a simple problem.

Best,
Roger

On Thu, Jul 14, 2011 at 11:13 AM, Charles Land <cland at geo-marine.com> wrote:

> I would set it as air handler per floor as you have it and then make the
> changes in the detail mode.  Or make three separate systems per site and
> assign the correct shells and floors to the units in the wizard.****
>
> ** **
>
> *From:* equest-users-bounces at lists.onebuilding.org [mailto:
> equest-users-bounces at lists.onebuilding.org] *On Behalf Of *Roger Maranan
> *Sent:* Thursday, July 14, 2011 11:05 AM
> *To:* equest-users at lists.onebuilding.org
> *Subject:* [Equest-users] Air Handler Per Floor****
>
> ** **
>
> Hi,****
>
> ** **
>
> How do I apply an air handler per floor with multiple shells on the same
> floor?I am trying to model an HVAC system with an air handler on each floor
> of a two story building. How the building is set up in my model is that
> shells 1 and 2 are the first floor and shell 3 is the basement. ****
>
> ** **
>
> Thanks for the help,****
>
> ** **
>
> Roger Maranan****
>
> ** **
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110714/e4113bf9/attachment-0002.htm>