[Equest-users] MIN AIR SCH

[Arpan Bakshi]

Space level inputs will override system level inputs here. May want to check
those.



On Tue, May 24, 2011 at 12:35 PM, Rob Hudson <rdh4176 at gmail.com> wrote:

> When trying to set up a space to have economizer mode using the schedule, i
> can't seem to make it work.
>
> When i enter the value 0.001 as requested by the help files, to enable
> economizer mode and let the unit go to 0% during the unoccupied periods, it
> doesn't work.
>
> When i enter -999 as requested by the help files to allow my stated OA
> ratio to rule (33% in this case) it doesn't allow it to go to 100% OA and
> therefore i get unmet hours.
>
> If i set the value to 1 at all times, then i get 100% OA during the summer,
> which is not advised.
>
> Any help is appreciated,
>
> --
> Rob Hudson
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 


Arpan Bakshi,* *LEED AP BD+C
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110524/fb98de11/attachment-0002.htm>