[Equest-users] MIN AIR SCH

[Arpan Bakshi]

For OA, that is.


On Tue, May 24, 2011 at 1:38 PM, Arpan Bakshi <arpanbakshi at gmail.com> wrote:

> Space level inputs will override system level inputs here. May want to
> check those.
>
>
>
> On Tue, May 24, 2011 at 12:35 PM, Rob Hudson <rdh4176 at gmail.com> wrote:
>
>> When trying to set up a space to have economizer mode using the schedule,
>> i can't seem to make it work.
>>
>> When i enter the value 0.001 as requested by the help files, to enable
>> economizer mode and let the unit go to 0% during the unoccupied periods, it
>> doesn't work.
>>
>> When i enter -999 as requested by the help files to allow my stated OA
>> ratio to rule (33% in this case) it doesn't allow it to go to 100% OA and
>> therefore i get unmet hours.
>>
>> If i set the value to 1 at all times, then i get 100% OA during the
>> summer, which is not advised.
>>
>> Any help is appreciated,
>>
>> --
>> Rob Hudson
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
>
> --
>
>
> Arpan Bakshi,* *LEED AP BD+C
>
>


-- 


Arpan Bakshi,* *LEED AP BD+C
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110524/239a2371/attachment-0002.htm>