[Equest-users] Modeling a semi-underground floor
Nick Caton
ncaton at smithboucher.com
Wed Oct 12 08:59:18 PDT 2011
Attached discussion and the linked pictorial guide inside will be of
interest.
For future reference, be sure to bookmark/favorite the mailing list
archives!
http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/
<http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/>
http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/
<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/>
~Nick
NICK CATON, P.E.
SENIOR ENGINEER
Smith & Boucher Engineers
25501 west valley parkway, suite 200
olathe, ks 66061
direct 913.344.0036
fax 913.345.0617
www.smithboucher.com
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of
atowell at cxegroup.com
Sent: Wednesday, October 12, 2011 9:01 AM
To: Danny Xu; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Modeling a semi-underground floor
Danny-
I don't know if this is the best method or not, but when I run into this
problem I change the wall constructions and attributes in the detailed
edit mode. I will model the building with no underground walls, then in
the detailed mode I will delete the walls that need to be underground
and just replace them with underground walls. Hope this helps!
Adam Towell
CxE Group, LLC
618-659-9461
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Danny
Xu
Sent: Tuesday, October 11, 2011 4:27 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Modeling a semi-underground floor
Hi all,
Would you please advise how to model a floor in eQUEST with south and
east walls underground and west and north walls above ground? Thanks.
Regards,
Danny
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111012/aa1c4b39/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1459 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111012/aa1c4b39/attachment-0002.jpeg>
-------------- next part --------------
An embedded message was scrubbed...
From: "Nick Caton" <ncaton at smithboucher.com>
Subject: Re: [Equest-users] Changing wall types in detailed edit mode
Date: Mon, 18 Apr 2011 14:39:47 -0500
Size: 966551
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111012/aa1c4b39/attachment-0002.eml>
More information about the Equest-users
mailing list