[Equest-users] How to Model This?

[Charles Land]

I had something similar to this before.  I believe I made the chillers water cooled chillers and used the water-side economizer chiller and played with the performance curves to get close to what I needed.  I also zeroed out any energy associated with the heat rejection. If anyone knows of a better way to simulate this I would be interested as well.

-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Ömer Moltay
Sent: Wednesday, August 15, 2012 4:26 PM
To: eQUEST Users List
Subject: [Equest-users] How to Model This?

Dear All,

How would you model the following: An office building in a cold climate is cooled with air condenser chillers during summer, spring and autumn, but with dry coolers during winter. The chillers will be completely off when the dry coolers are running.

While trying, I have realized that I cannot assign any dry coolers (ie. 
heat rejection) to the same circulation loop connected to the chillers.

Thanks,

Omer Moltay
Mimta


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG