[Equest-users] FW: Schedules for HVAC systems

[Zaburskaya, Svetlana]

I generate copies in Wizard, assign them to the correct shell, then move
to detailed and cannot see correct schedules (I mean cooling/heating
day) or I cannot see them at all for a copied systems in detailed mode.
I found it by accident when I started to do DR measures. Then I decided
to run a test just for a simple 2-story building served by two different
systems on each floor. Exactly the same thing happened. When I created
the 2nd system from a scratch, everything worked fine; then I tried to
generate a second one as a copy of existing one, the software did not
work correctly and you can see it only later if you will move to
detailed mode.

 

 

From: Zaburskaya, Svetlana 
Sent: Thursday, January 12, 2012 8:41 AM
To: equest-users at lists.onebuilding.org; 'Jeff.Hirsch at DOE2.com'
Subject: Schedules for HVAC systems

 

Hello,

 

I found a strange thing in 3.64 version. When I do copies from existing
HVAC systems for a new system, the program does not generate correct
schedules for a copied system or does not generate at all for it. It
works fine if I generate the system from a scratch. I work with this
software for about 7 years and I never saw something like this in any
previous versions. If anybody knows how to resolve this?

 

Thank you,

 

 

Svetlana Zaburskaya 
Senior Engineer 
Kema Services, Inc. 
155 Grand Avenue 
Suite 500 
Oakland, CA 94612 
Tel (510) 891-0446 
Fax (510) 891-0440 
svetlana.zaburskaya at kema.com 
www.kema.com 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120112/3f9030ce/attachment.htm>