[Equest-users] Misc Loads

[Sami, Vikram]

The miscellaneous loads are probably reporting out as equipment loads

FYI - 4W/ft2 is pretty high for equipment loads - unless your modeling a research lab type environment.





Vikram Sami, LEED AP BD+C
Sustainable Design Analyst
1315 Peachtree St. NE, Atlanta, GA 30309
t: 404-443-7462    f: 404.892.5823       e: vikram.sami at perkinswill.com   www.perkinswill.com<http://www.perkinswill.com/>
Perkins+Will.  Ideas + buildings that honor the broader goals of society


From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Jain, Sunayana
Sent: Thursday, January 05, 2012 5:06 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Misc Loads

Hi all,

I have a question regarding miscellaneous loads in Design Development Wizard in eQUEST (Screen 20 of 25).

If we increase load in misc. for any of the  spaces to let say 4 W/sq ft, the misc. equipment loads in BEPS report shifts to a  very very high number.

Any idea, what all is contributing to such a high number.

Please note that there is no Water side HVAC involved.

Thanks,

Sunayana Jain





This email and any files transmitted with it are confidential and intended solely for the addressee. If you are not the named addressee you should not disseminate, distribute, copy, or alter this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120105/fa1585b2/attachment-0002.htm>