[Equest-users] eQuest: No Heat Loss in some zones

[Sami, Vikram]

Are these internal zones? If so - it might not be out of the question that there is no heat loss. Are you looking at the appropriate LS report?




Vikram Sami, LEED AP BD+C
Sustainable Design Analyst
1315 Peachtree St. NE, Atlanta, GA 30309
t: 404-443-7462    f: 404.892.5823       e: vikram.sami at perkinswill.com   www.perkinswill.com<http://www.perkinswill.com/>
Perkins+Will.  Ideas + buildings that honor the broader goals of society


From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Steven Savich
Sent: Tuesday, July 17, 2012 2:09 PM
To: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] eQuest: No Heat Loss in some zones

Mr Singh,

For help on diagnosing model problems, you'll need to post your .inp & .pd2 files for the rest of us to be able to see what's going on.

Steven

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Satwinder Singh
Sent: Tuesday, July 17, 2012 11:05 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] eQuest: No Heat Loss in some zones

Hi there,

We have 2 buildings in the model. Building A - which is more complex with gym, kitchen, lounge, offices, classrooms et al seems to be fine. However Building B, a simpler 3-storey elongated residential building (added later) seems faulty. We are not getting any BDL errors, but the simulation file shows that it shows ZERO heat loss for some of its zones... This is perplexing to us as we have done, redone it a million times. Tried everything we could think of, but the problem persists. We would love to see what wrong we are doing. Any input and/or help will be much appreciated.

Regards,

Sat Singh
Mechanical Engineer
Flow Consulting Group Inc.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120717/380229e7/attachment-0001.htm>