[Equest-users] Inadequate cooling connected to roof zone?
Patrick J. O'Leary, Jr.
poleary1969 at gmail.com
Fri Jun 8 13:25:58 PDT 2012
this is a warning message. not an error message. i get these messages
every time i input capacities manually even if i have zero unmet load
hours. not sure why but since they're just warning messages & if i have
unmet load hours that comply w/the unmet load hour requirements i ignore
them.
On 6/8/12 12:16 PM, tim wrote:
>
> Happy Friday All!
>
> I get this error after running the simulation:
>
> I was getting similar errors on all zones until they went away when I
> switched from auto-size and specified 15.5 tons for ac & 175 kbtuh for
> heat. Still get this one error message though and oddly this zone
> (G.S1) is listed under the same hvac system as the roof zone. It
> doesn't look like the roof zone is being heated or cooled, but
> something looks fishy.
>
> Any ideas?
>
> Thanks in advance!
>
> Timothy W. Hill
>
> tim.JRGA at fuse.net
>
> John R. Grier, Architect
>
> 11309 Deerfield Road
>
> Cincinnati, Ohio 45242
>
> (513)489-3690
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120608/457e1747/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 10439 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120608/457e1747/attachment-0002.jpeg>
More information about the Equest-users
mailing list