[Equest-users] The initial trial zone temperature

[R B]

You could run the building with high infiltration rates and no
cooling/heating coming on to get the inside temps same as outside. Once the
temps are what you are looking for, you can schedule the infiltration back
to normal levels.
-Rohini

On Sun, Jun 10, 2012 at 11:47 AM, Tsai <r99631007 at ntu.edu.tw> wrote:

> Dear all,
>
> I'm using eQUEST to simulate a small container house without windows.
> I want to get the hourly trial zone temperature, and the simulation time
> is only for 1 or 2 days.
>
> I want to assum that in the beginning, the inside temperature is equal to
> the outside temperature.
> Therefore, I'd like to know if the initial inside trial zone temperature
> is the same as the outside temperature (in the weather bin file).
> If not, how could I set the initial inside zone trial temperature?
>
> I've done some simulation test, but the inside zone trial temperature
> result for the first hour is always much lower than the outside temperature.
>
> By the way, I'm curious about the meaning of hourly temperature in eQUEST.
> Are they the average temperature in each hour?
>
> Thank you.
>
> Lily
>
> ______________________________**_________________
> Equest-users mailing list
> http://lists.onebuilding.org/**listinfo.cgi/equest-users-**onebuilding.org<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE@**ONEBUILDING.ORG<EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120610/f3cfaa77/attachment-0001.htm>