[Equest-users] HRV with baseboard heating

[Brian Smith]

And set the VAV min position to 100%

 

From: Brian Smith [mailto:brians at murraypc.com] 
Sent: Tuesday, June 26, 2012 10:05 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] HRV with baseboard heating

 

Hello,

 

I'm modeling a women's shelter, lets approximate it as a low rise
residential apts. The ventilation system is to simply supply a constant
volume of air to all the zones on each floor, ducted return before going
through a heat exchanger to condition the OA. No heating or cooling coils,
just baseboard heating in the rooms. I originally modeled it as Pkgd
Multizone system then removed the HC, effectively removed Cooling, and added
Heat Recovery, is this fair? I looked through the archives and saw a
suggestion for and Induction system but im not actually mixing the air
flows. Any help is greatly appreciated.

 

Regards

Brian Smith, Mechanical Design Engineer

Murray & Associates, P.C.

T/907.780.6151 F/907.780.6182

www.murraypc.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120627/ef7b149a/attachment-0002.htm>