[Equest-users] Adobe/Compressed Earth Construction?
Dana.Etherington at crbusa.com
Tue May 15 05:26:20 PDT 2012
The performance of an adobe wall is more related to its thermal capacitance, or ability to store heat, not necessarily the R-Value... You should be able to model this in eQuest by creating a material and defining its thermal properties. I have never tried it myself though.
The wall basically absorbs heat from the sun throughout the day and transfers some of that heat to the interior once the sun goes down. Good for climates with high temperatures during the day and cooler temperatures at night.
Hope this helps.
Mr. Dana Etherington, E.I.T., LEED AP BD+C | CRB | One Kendall Square Ste B2202 | Cambridge, MA 02139
Main: 617-475-3050 | Direct: 617-475-3061 | Mobile: 617-583-3009 | Fax: 617-475-3052 | Ext: 6061
Email: dana.etherington at crbusa.com<mailto:dana.etherington at crbusa.com> | www.crbusa.com<http://www.crbusa.com/>
This document may contain confidential information and is intended for use by the addressee only. If you are not
the intended recipient, please do not transmit, copy, disclose, or utilize this communication in any manner. If you
received this message in error, please notify the sender immediately and delete this message.
ü Please consider the environment before printing this email.
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Cole Hudson
Sent: Monday, May 14, 2012 7:27 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Adobe/Compressed Earth Construction?
I'm working on a small building in a coastal environment in South Texas. The Architect is contemplating adobe construction. Unfortunately, my search of the archives did not yield any results, as the archives are full of discussions regarding Adobe PDFs.
When assembled, the R-Value is only around R-6.0, or even less. If you believe all the propaganda these adobe salesmen are pushing, it would seem that an adobe wall can perform much better than that. Has anybody ever successfully modeled an adobe wall in eQUEST?
Cole Hudson, E.I.T.
Stridde Callins & Associates, Inc.
342 S. Navigation Blvd.
Corpus Christi, TX 78405
Tel: (361) 883-9199
Cell: (361) 876-0560
Fax: (361) 883-9177
**CONFIDENTIALITY NOTICE: Information contained in this email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, and have received this communication in error, please contact the sender by reply email and destroy all copies of the original message. Thank you.**
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Equest-users