[Equest-users] Gas INFRA-RED Radiant

Keith Swartz kswartz at ecw.org
Fri May 25 14:35:02 PDT 2012


Arash,

If the radiant heater does not have any fan associated with it, like a radiant ceiling panel, then I zero out the fan energy like Nick mentions. When the radiant heater has a combustion air fan, like a gas-fired radiant heater, then I enter fan data that matches the combustion air fan to capture that energy consumption.

________________________________
Keith Swartz, P.E., LEED AP

Energy Engineer / Senior Project Manager
Energy Center of Wisconsin
455 Science Drive, Suite 200, Madison, WI 53711
Phone: 608.238.8276 x123
Fax: 608.238.0523

The Buildings Team
Design decisions through energy, economics and emissions analysis.
www.ecw.org/Buildings<http://www.ecw.org/Buildings>

Energy Center University
Your gateway to sustainable design training and online education programs.
www.ecw.org/university/<http://www.ecw.org/university/>

From: Nick Caton [mailto:ncaton at smithboucher.com]
Sent: Friday, May 25, 2012 10:30 AM
To: Pasgar, Arash; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Gas INFRA-RED Radiant

Hi Arash,

There are a couple right answers.  Here's an approach I've used:

*        System type UHT

*        Zero out fan energy (0.00 kW/CFM), if there are no space circulation fans tied to your IR heater operation

*        eQuest doesn't simulate the skin-heating comfort effects of radiant heat.  If you run into unmet heating hours, you can justifiably lower associated thermotat setpoints to account for this.

*        DOE2 help files advise adjusting your HIR to 1.05 if products of combustion are not being vented out of the space (industrial applications).

~Nick

[cid:image001.jpg at 01CD3A94.469827C0]

NICK CATON, P.E.
SENIOR ENGINEER

Smith & Boucher Engineers
25501 west valley parkway, suite 200
olathe, ks 66061
direct 913.344.0036
fax 913.345.0617
www.smithboucher.com

From: equest-users-bounces at lists.onebuilding.org<mailto:equest-users-bounces at lists.onebuilding.org> [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Pasgar, Arash
Sent: Friday, May 25, 2012 10:09 AM
To: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: [Equest-users] Gas INFRA-RED Radiant

Hi all,

First of all sorry about the previous message.

I have a storage using gas infra-red radiant heaters. Is there accurate way to model this.
Thank you in advance for your help.

Arash Pasgar
Mechanical Designer

[cid:image002.jpg at 01CD3A94.469827C0]

v. 210.546.0200 | www.dbrinc.com<http://www.dbrinc.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120525/2c76e5c6/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1459 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120525/2c76e5c6/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 4870 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120525/2c76e5c6/attachment-0005.jpg>


More information about the Equest-users mailing list