[Equest-users] Roof Conduction Load

[Bhartendu Awasthi]

Hi All,

I am doing an energy simulation model in eQuest. I noticed that the
load through roof conduction in LS-C is zero where as in LS-B (for
plenum space) it is showing some load.

As per my understanding this load should appear in LS-C also.

Also, if I reduce the U value of the roof, the load through roof
reduces and can be accounted in LS-B only (plenum space).

Refer attached LS-C and LS-B reports.

Any help will be appreciated.


Thanks & Regards

Bhartendu Awasthi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130808/c3ff5708/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: LS-C Report - Zero Roof Conduction.png
Type: image/png
Size: 66882 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130808/c3ff5708/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: LS-B Report - Roof Conduction.png
Type: image/png
Size: 65877 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130808/c3ff5708/attachment-0001.png>