[Equest-users] Roof Conduction Load

[bfountain at greensim.com]

In the space screen for the plenum zones, there is a check box "include in reports" (or something like that.  Because it is unchecked, neither its conduction loads, nor its area are included in the building level reports. Checking this box for all plenums will add the roof and plenum wall conduction load to the LS-C report but the area reported will include plenum area. 
Brian Fountain
bfountain at greensim.com

-----Original Message-----
From: Bhartendu Awasthi <bhartendu.awasthi90 at gmail.com>
Sender: equest-users-bounces at lists.onebuilding.orgDate: Thu, 8 Aug 2013 16:04:57 
To: <equest-users at lists.onebuilding.org>; <bldg-sim at lists.onebuilding.org>
Subject: [Equest-users] Roof Conduction Load

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG