[Equest-users] Exhaust fans

[elenisoulti at co2engineering.eu]

Hi Jason,

Thank you very much for your help and the advice:) That makes sense.

Regards,

Eleni
-- 
Eleni Soulti

On behalf of

CO2 Engineering

Oficina Sevilla

Cartuja - Edificio Marie Curie

C/Leonardo da Vinci 18, Planta1 3ºB

41092 Sevilla | España

T.             (0034) 679883055

London Office

17, Bishops Close

E17 9RP London | UK

T.             (0044) 7969235926

Oficina Huelva.

Plaza Hermanos Costalero nº 2, 6º A

21001 Huelva | España

T.             (0034) 647143558

w.   www.co2engineering.eu

e.   elenisoulti at co2engineering.eu


Quoting Jason Kirchhoff <jason.p.kirchhoff at gmail.com>:

> Hi Eleni,
>
> Exhaust in eQuest is generally modeled at the zone level. Double click the
> zone that has an exhaust fan, then click the "Outdoor Air" tab. On the
> right you can define your exhaust parameters and a range of control
> options. The help file is pretty thorough here for explaining what the
> program will do. Keep in mind if your exhaust air is supplied by the
> system, the exhaust fan will only operate when the system for that zone is
> operating.
>
> The supply air reset is at the system level. Choose your system and click
> on the "Cooling" tab. The reset parameters are on the right. For a 90.1
> model, I choose "warmest" for control and set the maximum reset temp to
> 60F, though anyone please chime in if that's not how you interpret the
> requirement.
>
> And based on the time stamp of your email, the last bit of advice would be
> don't work too hard on Saturdays :)
>
>
> *Jason Kirchhoff*
> Technical Director
> Energize Analytics
> www.energizeanalytics.com
>