[Equest-users] No cooling load in high EPD zone_data center
John Aulbach
jra_sac at yahoo.com
Sat Jun 1 09:27:43 PDT 2013
Javel;
It would help to see your .INP and .PD2 files to access. If you have package cooling. the SS-D report should show cooling load, but no cooling will be shown in the Plant reports.
If you can send your inputs, we might have a better shot at helping you.
John R. Aulbach
________________________________
From: Javed Iqbal <eee.javed at gmail.com>
To: equest-users <equest-users at lists.onebuilding.org>
Sent: Saturday, June 1, 2013 8:47 AM
Subject: [Equest-users] No cooling load in high EPD zone_data center
Hello,
I'm trying to model a data center with 200kW internal load. It has dedicated PAC to meet the cooling load demand but after successfully running the simulation, i don't get any cooling load in the summary report. I tried to check the accuracy with equest default 5 zone model and i get load of around 175 TR which makes sense. I tried everything in my working model but unable to resolve this problem. Does anybody has come across similar problem? Any help would be appreciated.
Thanks in advance.
--
Javed Iqbal, LEED AP, CEA
Energy Analyst
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130601/f85225db/attachment-0002.htm>
More information about the Equest-users
mailing list