[Equest-users] use for residential

John Aulbach jra_sac at yahoo.com
Mon Jun 10 11:03:59 PDT 2013

Hi Brain:
I have personally created a house with eQuest and performed about 20 EEMs on it (various window, wall types, roof R values, unit efficiency). My key is to only model it as one zone, unless you have a ritzy house that has 2 AC zones.
Do you bills to match so you are getting a good fit?
John R. Aulbach, PE

From: "Wolfe, Brian" <bwolfe at hksinc.com>
To: "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org> 
Sent: Monday, June 10, 2013 10:51 AM
Subject: [Equest-users] use for residential

Is eQUEST an acceptable program for analyzing single family residential?  I’m assuming you can show it as multifamily, low-rise exterior entrance.  Thank you in advance. 
--- Brian W.  
Equest-users mailing list
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130610/fe1f4a6e/attachment-0002.htm>

More information about the Equest-users mailing list