[Equest-users] use for residential

[Mike Hupel]

That is a coincident.  I used it to model a house with 23 fan coils and a 40 ton air cooled chiller.  Oh yes, I did say house.  

 

 

Michael Hupel, B.Tech, CEM, LEED®AP

Senior Mechanical Designer

 

Aegis Engineering Inc.

56 Pennsylvania Ave. Suite 18

Concord, ON L4K 3V9

(905) 761-1264 ext. 24

(905) 761-6949 fax

(647) 702-3316 cell

 

P Please don't print this e-mail unless you really need to.

 

This message may contain information that is confidential and/or protected by law.  If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, copying or communication of this message is strictly prohibited.  If you have received this communication in error, please contact the sender immediately and delete the message.  Please note that although we will take all commercially reasonable efforts to prevent viruses from being transmitted from our systems, it is the responsibility of the recipient to check for and prevent adverse action by viruses on its own systems.

 

 

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of John Aulbach
Sent: June-10-13 2:04 PM
To: Wolfe, Brian; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] use for residential

 

Hi Brain:

 

I have personally created a house with eQuest and performed about 20 EEMs on it (various window, wall types, roof R values, unit efficiency). My key is to only model it as one zone, unless you have a ritzy house that has 2 AC zones.

 

Do you bills to match so you are getting a good fit?

 

John R. Aulbach, PE

 

From: "Wolfe, Brian" <bwolfe at hksinc.com>
To: "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org> 
Sent: Monday, June 10, 2013 10:51 AM
Subject: [Equest-users] use for residential

 

Is eQUEST an acceptable program for analyzing single family residential?  I’m assuming you can show it as multifamily, low-rise exterior entrance.  Thank you in advance. 

 

--- Brian W.  

 


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130610/c82c3e63/attachment-0002.htm>