[Equest-users] Unit Start/Stop Based on OA

[Robby Oylear]

eQUEST does not allow you to key any keyword value off of a value that will
change.  The indirect way to do this is to use the Rocky Mountain
Institute's schedule creator to create an 8760 hourly fan schedule that
would directly line up with your IF/THEN condition on the OAT.

-Robby


On Fri, Mar 1, 2013 at 2:01 PM, Adam Towell <ATowell at cxegroup.com> wrote:

>  Does anyone know if there is a way to schedule unit operation based on
> OA? For reference I have a building that uses ERUs and they shut off below
> ~35°F and above ~80°F (I'm aware this is backwards). In the model I would
> like to be able to shedule the units so that they would only operate within
> this temperature range. Does anybody have any suggestions? ****
>
> ** **
>
> Adam E. Towell****
>
> *Cx*E Group LLC****
>
> Consulting Engineers****
>
> Your Independent, Third-Party Commissioning Authority.****
>
> 20 Edwardsville Professional Park, Suite A****
>
> Edwardsville, Illinois 62025-3602****
>
> Phone:    618.659.9461****
>
> Fax:        618.659.9589****
>
> Email:   atowell at cxegroup.com <stowell at cxegroup.com>****
>
> ** **
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130301/2a7e63f4/attachment-0002.htm>