[Equest-users] Receptacle loads

[Byron Burns]

Do you have additional loads on an electric meter that are being added
to your equipment loads?

 

 


Byron Burns 



From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of
Andersen, Stephanie
Sent: Thursday, May 16, 2013 3:39 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Receptacle loads

 

Hey all,

 

I've created my proposed model, did a "save as" and created my baseline
model, and changed all of the HVAC systems etc. to the required 90.1
standards. I ran the simulations and exported the LEED  report and
noticed my receptacle loads aren't the same-the baseline is 12% higher
than the proposed. I've compared schedules, equipment loads, and square
footages, and they are identical in both the proposed and baseline
models. Is there something else I should be looking at? 

 

Thanks for your help!

 

Stephanie Andersen
Mechanical Designer

 

v. 210.546.0200 | www.dbrinc.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130516/76ffca72/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3660 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130516/76ffca72/attachment-0002.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 43571 bytes
Desc: image002.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130516/76ffca72/attachment-0002.png>