[Equest-users] hourly report errors - eQUEST 3.65
Dahlstrom, Aaron
ADahlstrom at in-posse.com
Mon Oct 28 15:42:35 PDT 2013
I have converted a 3.64 project into 3.65.
When I run hourly reports, the values reported for several key variables no longer appear to be reporting properly.
Variable I've tried so far:
- Global - Outside wet-bulb temp (F)
- Global - Outside dry-bulb temp (F)
- Building HVAC - Building cool load (coils+losses&gains) (Btu/hr)
- Building HVAC - Building heat load (coils+losses&gains) (Btu/hr)
These report as "0" every hour.
Anyone else have this issue?
I have run the software in compatibility mode, but not done extensive diagnostics beyond that.
For this project/deadline, I decided to pull out a recent archive v3.64 PD2 file and pair it with my current 3.65 INP file. It appears to run in 3.64 and the results compare favorably with pas 3.64 results.
There are some errors when the INP file reads, and the SIM file doesn't open cleanly, but the data appears to be preserved, and in the range I was expecting.
Aaron
Aaron Dahlstrom, PE, LEED(r) AP
In Posse - A subsidiary of AKF| 1500 Walnut Street, Suite 1414, Philadelphia, PA 19102
d: 215-282-6753| m: 267-507-5470| In Posse: 215-282-6800| AKF: 212-354-5656
e: ADahlstrom at in-posse.com | in posse web: www.in-posse.com<http://www.in-posse.com/> | akf web: www.AKFGroup.com
This e-mail may contain information that is confidential, privileged or otherwise protected from disclosure. If you are not an intended recipient of this e-mail, do not duplicate or redistribute it by any means. Please delete it and any attachments and notify the sender that you have received it in error. Unintended recipients are prohibited from taking action on the basis of information in this e-mail. E-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be intercepted, deleted or interfered without the knowledge of the sender or the intended recipient. If you are not comfortable with the risks associated with e-mail messages, you may decide not to use e-mail to communicate with In Posse.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20131028/d2857a4c/attachment.htm>
More information about the Equest-users
mailing list