[Equest-users] Boiler Loop flow vs Condenser Loop Flow

[Gerard Hazel]

Hi All,

Brian Fountain was kind enough to reply and suggest I share the .pd2 and
.inp files related to the model in question. Here they are.

Thank you Brian

 

 

Gerard Hazel 

M&E Engineers, Inc.

908-526-5700 x14

 

From: Gerard Hazel 
Sent: Thursday, October 24, 2013 12:14 PM
To: 'equest-users at lists.onebuilding.org'
Subject: Boiler Loop flow vs Condenser Loop Flow

 

Hi All,

I am modeling a WSHP system and have attached two boilers to it, each
with a boiler pump. I have a WLHP Tower Pump sized at 540 gpm and the
boiler pumps are 184 gpm as per the system design. I am getting an error
which says that the boiler pumps can't handle the full flow of the
condenser loop but I didn't think they had to. This is also causing an
insufficient heating problem. My guess is that I have made an error in
the way I have attached the boiler pumps to the loop but I don't know
how to fix it. I'd appreciate any suggestions about how to correct this.


Thanks in advance,

Gerry Hazel

 

Gerard Hazel 

M&E Engineers, Inc.

908-526-5700 x14

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20131024/b8732662/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BCRH Proposed Model U SZ .pd2
Type: application/octet-stream
Size: 322892 bytes
Desc: BCRH Proposed Model U SZ .pd2
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20131024/b8732662/attachment-0004.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BCRH Proposed Model U SZ .inp
Type: application/octet-stream
Size: 1310645 bytes
Desc: BCRH Proposed Model U SZ .inp
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20131024/b8732662/attachment-0005.obj>