[Equest-users] How to import 2 eQuest input files with the same origin?

[Kathryn Kerns]

Everyone, I have 2 lovely Detailed Edit buildings, both with their lower
left hand corners at the building origin of 0,0 that I would like to
combine using the Import function. To do this, I need to move one
building origin point from 0,0 to 200, 0. I thought that setting the
same latitude and longitude for both buildings and then setting the YREF
and XREF distances to 200, 0 on one building would do the trick, but it
seems not. I get error messages and the 3D view clearly shows the
buildings on top of each other because they have the same building
origin.

 

So, is there a way to shift a building origin point for an eQuest model
in the Detailed Edit and if so, where is it? Or do I have to do
something else?

 

 

 

Kathryn Kerns

Systems Specialist

BCE Engineers, Inc.

| Ph: 253.922.0446 | Fx: 253.922.0896 | 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130920/30f0967c/attachment.htm>