[Equest-users] Equest-users Digest, Vol 66, Issue 19

[astha lambha]

i need to give a start to equest which mode is preferable wizrd edit or
detailed edit


On Sun, Sep 22, 2013 at 1:32 AM, <equest-users-request at lists.onebuilding.org
> wrote:

> Send Equest-users mailing list submissions to
>         equest-users at lists.onebuilding.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>
> or, via email, send a message with subject or body 'help' to
>         equest-users-request at lists.onebuilding.org
>
> You can reach the person managing the list at
>         equest-users-owner at lists.onebuilding.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Equest-users digest..."
>
> Today's Topics:
>
>    1. How to import 2 eQuest input files with the same  origin?
>       (Kathryn Kerns)
>    2. Fan Electric Energy During Floating (Wahid Hamed)
>    3. Re: How to import 2 eQuest input files with the same      origin?
>       (Robby Oylear)
>
>
> ---------- Forwarded message ----------
> From: "Kathryn Kerns" <kathryn.kerns at bceengineers.com>
> To: <equest-users at lists.onebuilding.org>
> Cc:
> Date: Fri, 20 Sep 2013 15:27:03 -0700
> Subject: [Equest-users] How to import 2 eQuest input files with the same
> origin?
>
> Everyone, I have 2 lovely Detailed Edit buildings, both with their lower
> left hand corners at the building origin of 0,0 that I would like to
> combine using the Import function. To do this, I need to move one building
> origin point from 0,0 to 200, 0. I thought that setting the same latitude
> and longitude for both buildings and then setting the YREF and XREF
> distances to 200, 0 on one building would do the trick, but it seems not. I
> get error messages and the 3D view clearly shows the buildings on top of
> each other because they have the same building origin.****
>
> ** **
>
> So, is there a way to shift a building origin point for an eQuest model in
> the Detailed Edit and if so, where is it? Or do I have to do something else?
> ****
>
> ** **
>
> ** **
>
> ** **
>
> *Kathryn Kerns*****
>
> *Systems Specialist*****
>
> *BCE** Engineers, Inc.*
>
> *| Ph: 253.922.0446 | Fx: 253.922.0896 |* ****
>
>  ****
>
> ** **
>
>
> ---------- Forwarded message ----------
> From: Wahid Hamed <wahid.hamed at gmail.com>
> To: "equest-users at lists.onebuilding.org" <
> equest-users at lists.onebuilding.org>
> Cc:
> Date: Sat, 21 Sep 2013 17:34:23 +0300
> Subject: [Equest-users] Fan Electric Energy During Floating
> Dear All,
>
> I am using eQuest for modeling a singe zone reheat system for 100% OA *
> without* ERV. The simulation result has introduced a high amount of fan
> energy during floating which increase the fan energy significantly.
>
> When I altered to use ERV, the floating fan energy is ZERO.
>
> I wonder if anyone can help me with a guidance for setting up the system
> and its single zone to reduce or eliminate the floating fan energy.
>
> Regards,
>
> Wahid
>
>
> Wahid H. Mohamed, LEED AP BD+C
> Mechanical Project Engineer, Energy Modeler
> Saudi Diyar Consultants
> www. <http://www.diyar.com> <http://www.diyar.com>diyar.com<http://www.diyar.com>
>  ****
>
>  (+966)-5467 622 67
>
>
> ---------- Forwarded message ----------
> From: Robby Oylear <robbyoylear at gmail.com>
> To: Kathryn Kerns <kathryn.kerns at bceengineers.com>
> Cc: "equest-users at lists.onebuilding.org" <
> equest-users at lists.onebuilding.org>
> Date: Sat, 21 Sep 2013 07:41:25 -0700
> Subject: Re: [Equest-users] How to import 2 eQuest input files with the
> same origin?
> Kathryn,
>
> Unfortunately YREF & XREF are Building Parameters which apply to all
> floors within a model.  When you import the other building into the first
> model, only one of the Building Parameters will be in effect.  Since eQUEST
> thinks all of the floors are part of the same building, there's no way to
> group them into separate buildings.  Another way to think about this is
> that the building parameters is defining the origin of the building
> coordinate system.  You can't have two origins.
>
> I think you're going to have to manually go to each floor and from the
> other building and change the X, Y values to the appropriate coordinates
> for whichever building you want to move relative to the other.
>
> -Robby
>
>
> On Fri, Sep 20, 2013 at 3:27 PM, Kathryn Kerns <
> kathryn.kerns at bceengineers.com> wrote:
>
>>  Everyone, I have 2 lovely Detailed Edit buildings, both with their
>> lower left hand corners at the building origin of 0,0 that I would like to
>> combine using the Import function. To do this, I need to move one building
>> origin point from 0,0 to 200, 0. I thought that setting the same latitude
>> and longitude for both buildings and then setting the YREF and XREF
>> distances to 200, 0 on one building would do the trick, but it seems not. I
>> get error messages and the 3D view clearly shows the buildings on top of
>> each other because they have the same building origin.****
>>
>> ** **
>>
>> So, is there a way to shift a building origin point for an eQuest model
>> in the Detailed Edit and if so, where is it? Or do I have to do something
>> else?****
>>
>> ** **
>>
>> ** **
>>
>> ** **
>>
>> *Kathryn Kerns*****
>>
>> *Systems Specialist*****
>>
>> *BCE** Engineers, Inc.*
>>
>> *| Ph: 253.922.0446 | Fx: 253.922.0896 |* ****
>>
>>  ****
>>
>> ** **
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
> _______________________________________________
> Equest-users mailing list
> Equest-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130922/2c379d31/attachment.htm>