[Equest-users] Fwd: Modeling Exhaust Fans in Baseline case

[Wahid Hamed]

As per section G3.1.2.9 the exhaut and relief fans' power shall be modeled
in the baseline model.



Regards,


Wahid H. Mohamed, LEED AP BD+C
Mechanical Project Engineer, Energy Modeler
Saudi Diyar Consultants
www. <http://www.diyar.com>
<http://www.diyar.com>diyar.com<http://www.diyar.com>
 ****

 (+966)-5467 622 67




On Mon, Sep 16, 2013 at 8:37 AM, GK Pandian <kgkpandian at gmail.com> wrote:

> Aditya,
>
> Refer to table G3.1, you need to model exhasut fan power in baseline as
> well. That's my understanding.
> Normally i add them into "Zone features" box under Air side summary.
>
> Gopi
>
> From: Aditya Nataraj <adityanataraj at yahoo.in>
> Date: Sun, Sep 15, 2013 at 5:19 PM
> Subject: [Equest-users] Modeling Exhaust Fans in Baseline case
> To: "equest-users at lists.onebuilding.org" <
> equest-users at lists.onebuilding.org>
>
>
> Hi Friends,
>
> I am new to eQuest. I am working on one residential building. The Proposed
> case consist of Exhaust fans in each residential apartments. So My Question
> is : Shall I have to consider Exhaust fans in Baseline case too? I think as
> per G3.1.2.7 ASHRAE 90.1-2007 we need to model baseline Fans in Baseline
> too. Is my interpretation correct?
>
> Thanks,
>
> Aditya
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130916/618cdb5b/attachment-0002.htm>